HDMI Full HD 1080P , 4 Way Over Single Cat5e/6 , Splitter
Introduction
HDMI Splitter is a product which can distribute HDMI signal without
loss to one or more high definition display device such as HDTV. It
can optimize your home theatre system to the best effect.
HDMI signal is distributed from source device such as DVD,
Satellite Receiver, Set-Top Box, DV Camera, A/V Receiver and other
HDMI enabled device to high definition display device such as HDTV
and HDMI Flat panel Display.
Technical parameters
| HDMI resolution | 3D /1080p/1080i/720p/576p/576i/480p/480i |
| Support video color format | 24bit/deep color 30bit,36bit |
| Support audio format | DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD |
| Max bandwidth | 250MHz |
| Max baud rate | 6.25Gbps |
| Input/Output TMDS signal | 0.5~1.5Volts p-p(TTL) |
| Input/Output DDC signal | 5Volts p-p (TTL) |
| Input cable distance | ≤10m AWG26 HDMI standard cable |
| Output cable distance | ≤60m Cat5e/6 cable |
| Max working current | 1800mA |
| Power adapter format Input | AC (50HZ, 60HZ) :100V-240V; Output: DC5V/2A |
| Operating Temperature range | (-15 to +55℃) |
| Operating Humidity range | 5 to 90%RH (No Condensation) |
| Dimension (L x W x H) | Splitter:150x64x25 (mm)Receiver:82x43.5x25(mm) |
| Weight | 650g(spilitter+Receiver) |
Features
1. One HDMI input signal split to four HDMI sink devices(four
outputs is the RJ45 output).
2. Fully HDMI 1.3 specification compliant. It is applicable to
source device and high definition display device ,such as DVD and
HDTV which have HDMI Ports or digital ports and are compliant with
HDCP protocol.
3. Support high resolutions up to 1920*1200,including
480i/p,576i/p,720i/p,1080i/p.
4. Support 30/36 dark, extended color space support,
including:SYCC601,Adobe RGB,AdobeYCC601.
5. Blu-ray DVD 24/50/60fs/HD-DVD/xvYCC.
6.Audio formats DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3 and DSD.
Connection diagram
Using Splitter and Receiver pairing, you can achieve the
transmission of HDMI signals to 60 meters, through the Cat5e/6
Cable.
1. Connect the HDMI cable between signal source and input port of
Splitter.
2. Connect the Network cable between output port of Splitter and
Receiver.
3. Connect the HDMI cable between output port of Receiver and HDTV.
4. Connect splitter and Receiver power adapter.
5. Open the signal source and the power of HDTV, then it works.
