HDMI 2 x 2 , 3D , 4K x 2K , 60Hz Switch/Splitter
Technical parameters
| HDMI Source Input Port | 2 |
| Display Device Output Port | 2 |
| Source Port Connector | 19 PIN HDMI |
| Output Audio Port | SPDIFx1,R/Lx1 |
| Display Device Port Connector | 19 PIN HDMI |
| HDCP Compliant | YES |
| Single Link Range | 3840x2160 |
| Input Video Signal | 0.5-1.0 Volts P-P |
| Input DDC Signal | 5 Volts P-P(TTL) |
| Deep Color | 48 Bit |
| HDMI Version | HDMI2.0 |
| Bandwidth | Up to 600Mhz |
| Signal Speed | Up to 18Gbps |
| The length of input cable | PS4≤10M；BLUE DVD≤10M |
| The length of output cable | ≤10M |
| The cable standard | 28AWG HDMI2.0 |
| Vertical Frequency Range | 60Hz |
| Power Consumption(max.) | 3.5Watts |
| Operation Temperature | 0℃-70℃ |
| Working Voltage | DC 5V |
| Power Adaptor | 5V 1A |
| Net Weight | 0.22kg |
| Dimension: L*W*H(mm) | 149x64x25 |
Features
1. Fully HDMI 2.0 specification compliant. It is applicable to
source device and high definition display device ,such as DVD and
HDTV which have HDMI Ports or digital ports and are compliant with
HDCP1.1/1.2/1.4/2.2 protocol;
2. Support video format up to 4k2k@60Hz with 24bit RGB/YcbCR
4:4:4/YCBCR4:4:4,and up to
4k2k@60Hz with 12bit YCBCR 4:4:4;
3. Support 3D frame sequential video format up to 1080p@60;
4. Supports Output simultaneous display at different resolutions;
5. Support Audio Extrator;
6. Blu-ray DVD 24/50/60fs/HD-DVD/xvYCC;
Panel Introduction
SPDIF ---------------------------------------Digital Audio Output
Port
R/L ------------------------------------------Analog Audio Output
Port
IR --------------------------------------------------------IR
Receiver Port
Out1-2--------------------------------------------------Output1-2
Status
In1-2-----------------------------------------------------------Input
Status
Select ------------------------------------------------Input select
button
Power ------------------------------------------------------Power
Status
ON/OFF ----------------------------------------------------Power
button
DC5V---------------------------------------------DC Power Input
Port
HDMI Input1-2-----------------------------------HDMI Input1-2 Port
HDMI Output1-2------------------------------HDMI Output1-2 Port
Connection diagram
1. Connect the HDMI cable between signal source and input port of
Splitter.
2. Connect the HDMI cable between output port of Splitter and HDTV.
3. Connect splitter and power adapter.
4. Open the signal source and the power of HDTV, then it works.
5. Use the remote control or toggle button to select the source you
want.
