HDMI 3 x 1 , 3D 4K x 2K , Extractor Switcher
Introduction
The device is one multiple ports HDMI Audio Extractor with support
of ARC,3D and 4KX2K,which can switch easily multiple HD Sources one
HD Display. Also any of the input sources support the audio extract
by the SPDIF and LR audio output channel. The Switcher supports ARC
function that can do TV audio return back to the AV receiver.
Technical parameters
| Video and Audio | |
| HDMI resolution | Ultra HD 3D 4Kx2K@50/60Hz ( max) |
| Source Port Connector | 36-bit Deep Color all channels maximum |
| Audio output | HDMI pass-through; Up to 7.1CH; SPDIF output up to 5.1 ch; 3.5mm stereo output audio . |
| Max bandwidth per channel | 300MHz |
| Max baud rate per display | 10.2Gbps |
| Input/Output TMDS signal | 0.5~1.5V p-p(TTL) |
| Input/Output DDC signal | 5V p-p(TTL) |
| Input cable distance | ≤50ft/15m 24 AWG HDMI high speed Cable at1080P@24bit 60Hz |
| Output cable distance | ≤50ft/15m 24 AWG HDMI high speed Cable at1080P@24bit 60Hz |
| Environmental | |
| Operating Temperature range | 5°F to 131°F / -15°C to 55°C |
| Operating Humidity range | 5% to 90% RH(No Condensation) |
| Mechanical | |
| Dimension(LxWxH) | 149.5x64x25(mm) |
| Weight | 290g |
| Power Requirement | |
| Power Consumption(max) | 1.5 Watts |
| Operation Temperature | 0℃ TO 70℃ |
| Working Voltage | DC 5V |
| Power Adapter | 5V 1A
|
Features
1. Input: HDMI x 3.
2. Output: HDMI x 1, Toslink /SPDIF x 1, AUDIO x 1.
3. Supports Ultra HD 4Kx2K@25/30Hz.
4. Supports Full HD.
5. Supports 3D.
6. Supports HDCP pass-through.
PANEL DESCRIPTIONS
Pass/2CH/5.1CH-------------------------------Output Audio Format
Switch
ARC
--------------------------------------------------------------------ARC
Switch
IR
------------------------------------------------------------------------IR
Receiver
L1-L3 --------------------------------------------------------HDMI
Input Indicator
Select
----------------------------------------------------------HDMI
Input Switch
Power---------------------------------------------------------------Power
Indicator
ON/OFF
--------------------------------------------------------------Power
Button
DC/5V-------------------------------------------------------------Power
Input Port
HDMI Input 1-3
---------------------------------------------------HDMI Input1-3
HDMI Output --------------------------------------------------HDMI
Output Port
SPDIF Output ----------------------------------------------Digital
Audio Output
Audio
--------------------------------------------------------Analog
Audio Output
Connection diagram
It switches several routes HDMI signals from source device such as
DVD, Satellite Receiver, Set-top Box, DV Camera, A/V Receiver and
other HDMI enabled device to high definition display device such as
HDTV and HDMI Flat Panel Display.
1. Use a HDMI cable to connect a HD source to the HDMI Input Port.
2. Use a HDMI cable to connect a HD display to the HDMI Output
Port.
3. For audio connection, choose one from the following options.
a.To use HDMI pass-through, use the HDMI cable from step 2 to
connect audio receiver to the HDMI Output Port. Your audio
receiver will have to output video signal to your HD display.
b.To use Toslink, use a Toslink cable to connect to audio
equipment.
(Note: Toslink does not support Dolby Digital Plus. Please change
the input source's audio output to a different setting, if needed.)
c.To use Coaxial, use a Coaxial cable to connect to Stereo audio
equipment.
4. Connect the power adapter.
5. Note: If using Toslink cable, please make sure the rubber
protective
tip cover has already been removed from both ends before connecting
them to devices.
